Ikhsan, Ikhsan (2024) Perbandingan Gerakan Elektroda Terhadap Uji Mikrostruktur, Uji Bending Dan Uji Impak Pada Pegas Daun Mitsubishi Canter 125 Ps. Other thesis, Universitas Islam Riau.

Text 193310446_compressed.pdf - Submitted Version Restricted to Registered users only Download (3MB) | Request a copy

Abstract

Welding is a process of joining two metals, especially steel, to obtain a finished material connection in a liquid state. The aim of this research is to obtain bending strength, impact strength and microstructure in welding joints with various variations of spiral electrode movement, zig-zag and U electrode movement. The welding process uses a SMAW welding machine with a current of 90A, E7018 electrode wire with a diameter of 2.6 mm, the material used is SUP9A leaf spring steel which is made at an X angle of 60°. The results showed that impact testing with zig-zag electrode movement obtained the highest average impact value of 1.33 Joules/mm², while the highest average bending strength value was found in the U electrode movement of 111.2 MPa and the lowest bending strength value. in the zig-zag electrode movement, namely 97.4 MPa, in microstructure testing the zig-zag electrode movement has hard material properties because there is more pearlite phase dominant, in spiral and U electrode movements

Actions (login required)

View Item