Evaluasi Teknik Fishing Job Dengan Menggunakan Breaking Free Technique Pada Sumur X Danz Di Lapangan YP

Pranadifa, Yoga (2021) Evaluasi Teknik Fishing Job Dengan Menggunakan Breaking Free Technique Pada Sumur X Danz Di Lapangan YP. Other thesis, Universitas Islam Riau.

Text 143210748.pdf - Submitted Version Download (11MB)

Abstract

When the packer release process is carried out to re-set the packer at intervals where the problem occurs in wells X and Z, where the packer is left stuck in well X and well Z. At the time of the fishing job some of the packers are stuck behind and cause obstacles to perform. Swab test interval jobs. This happens because of the failure of the mechanism in the packer release process. To remove objects that are left in wells X and Z, a fishing process is carried out to release the clamp points of objects or equipment that are caught in the well bore. The breaking free technique method is used in this well media by determining the point of the packer stuck clamp, then calculating the tension and torque load, after doing this calculation just do the breaking free teqhnique method. This method was chosen to be used in wells X and Z because the cost is much more economical than other methods. To determine the success rate of the breaking free technique method in wells X and Z, it is necessary to analyze this method, the success rate of this method can be seen from the release of the stuck object, the time used in the fishing process is less and the cost is cheaper. The analysis is carried out by calculating fishing economic. This method is expected to be successful and can be applied to other wells that have the same problems as wells X and Z.

Actions (login required)

View Item